| Configuration | 12-inch 2-way multipurpose |
Transducers
Low-frequency
Mid-frequency
High-frequency |
12-inch cone transducer
-
1.75-inch diaphragm compression driver |
| Frequency Response (-6 dB) | 53 Hz to 18 kHz |
| Frequency Range (-10 dB) | 50 Hz to 20 kHz |
| Nominal Coverage (-6 dB) | 75° axisymmetric |
| Maximum SPL1 | 131 dB peak |
| Amplifier |
| Power Output2 | 1000 W Class D (500 W LF + 500 W HF) continuous
2000 W peak |
| Input Impedance | Channel A XLR / ¼⁻ᶦⁿᶜʰ:| Mic gain setting | Balanced | Unbalanced | | 0 dB | 38 kΩ | 19 kΩ | | +12 dB | 10 kΩ | 5 kΩ | | +24 dB | 2.66 kΩ | 1.33 kΩ | | +36 dB | 660Ω | 330Ω |
Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced
Channel B RCA: 10 kΩ |
| Controls | Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators | Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings) |
| Connectors | Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling | On demand, 50 mm variable speed fan |
| Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection | Thermal limiting, excursion limiting |
| AC Power Input | Universal power supply 100–240 VAC, 50 to 60 Hz |
AC Power Consumption
(1/8 Power) | 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
| Material | 15 mm painted birch plywood |
| Finish | Black textured paint |
| Grille | Black powder coated 16 gauge steel |
| Speaker Dimensions (H×W×D) | 660 × 381 × 391 mm
26 × 15 × 15.4 in |
| Carton Dimensions (H×W×D) | 710 × 530 × 508 mm
28 × 20.9 × 20 in |
| Net Weight | 22.2 kg / 49 lb |
| Shipping Weight | 29 kg / 63.9 lb |
| Available Accessories | KW122 suspension kit, KW122 cover, KW M10 kit |
